油压夹紧 TC1600H

  1. 旋臂升降系采用电子计时器控制,启动按钮即可完成旋臂自动放松并垂直升降,或升降停止并自动夹紧作业,易于操作,并在换刀后仍可保持原刀具中心位置。
  2. 内装齿轮专用型机油循环泵浦,以冷却齿轮箱内精密齿轮,可降低齿轮过度磨损。
  3. 摩擦型离合器可吸收主轴所产生纵向冲击力,故能有效地保护齿轮箱内所有传动元件,并具有主轴快速回位功能,可加快攻牙作业速度。
  4. 旋臂升降机构附有安全装置,以防止多年以后,因升降铜螺母过度磨损而旋臂突然掉落。
  5. 机柱、旋臂、齿轮箱可同时夹紧,设有选择开关可使用。
MODEL TC-1600H  
Dai.of column 320 A
Distance from column surface to spindle center , Max 1600 D+C
Distance from column surface to spindle center , Min 350 C
Travel of spindle head 1250 D
Distance from base surface to spindle end , Max 1420 E
Distance from base surface to spindle end , Min 465 F
Elevating height of Arm 680 E-F-I
Effective area of box table 630x500x500 L×K×H
Dimension of base 2550x970x200 R×S×Q
Taper hole spindle MT5  
Stroke of spindle 270 I
R.P.M of spindle (rpm x steps) 56-1450x12  
Feed of spindle (rev. x steps) 0.06 , 0.10 ,0.20x3  
Main motor  (HP) 5 (two speed motor)  
Elevating motor (HP) 2HP  
Hydraulic clamping motor (HP) 1 HP  
Coolant equipment (HP) 1/8 HP  
Machine height from floor (Max.) 2790 M
Base + column height 2190 G
Net weight (approx)kgs 3300 (kg)  
S Shipping weight (approx)kgs 3800 (kg)  
Shipping dimensions (LxWxH) 2670×1120×2410  
Capacity Drilling Stell 50Φ  
Cast iron 60Φ  
Tapping Stell 40Φ  
Cast iron 50Φ